1. <var id="66166"><rt id="66166"></rt></var>
        <var id="66166"><rt id="66166"><big id="66166"></big></rt></var>
        首頁 > 論文 > 激光與光電子學進展 > 56卷 > 14期(pp:141004--1)

        基于facet模型的三維纖維方向檢測方法研究

        Three-Dimensional Fiber Orientation Detection Based on facet Model

        • 摘要
        • 論文信息
        • 參考文獻
        • 被引情況
        • PDF全文
        分享:

        摘要

        針對三維纖維微觀結構方向檢測的不足,提出一種基于facet模型的三維纖維方向檢測方法。該方法將三維纖維方向檢測轉換為二維平面檢測,能夠降低計算的復雜度,通過facet模型實現了不同直徑纖維方向的精確檢測,模型窗口尺寸略大于纖維直徑時能達到最優結果。實驗結果表明,所提方法可快速準確地獲取不同直徑的三維纖維方向數據,優于現有的典型算法。

        Abstract

        Orientation detection is not considerably performed for describing the microstructures of three-dimensional (3D) fibers. Therefore, a novel 3D fiber orientation detection method is proposed based on a facet model for converting the 3D fiber orientation detection into two-dimensional (2D) plane detection, reducing the computational complexity and realizing the accurate detection of different diameter fiber orientations. The size of the model window should be slightly larger than the fiber diameter for obtaining the optimal results. The experimental results denote that the proposed method is more accurate and fast when compared with the existing typical algorithms at obtaining the 3D fiber orientation data in case of different diameters.

        Newport宣傳-MKS新實驗室計劃
        補充資料

        DOI:10.3788/LOP56.141004

        所屬欄目:圖像處理

        基金項目:福建省自然科學基金、中央引導地方科技發展專項、國家教育部創新團隊發展計劃項目、福建省科技廳光電傳感應用工程技術研究中心開放課題;

        收稿日期:2019-01-09

        修改稿日期:2019-02-18

        網絡出版日期:2019-07-01

        作者單位    點擊查看

        陳冠楠:醫學光電科學與技術教育部重點實驗室, 福建省光子技術重點實驗室, 福建師范大學, 福建 福州 350007
        周群:醫學光電科學與技術教育部重點實驗室, 福建省光子技術重點實驗室, 福建師范大學, 福建 福州 350007
        韋超:醫學光電科學與技術教育部重點實驗室, 福建省光子技術重點實驗室, 福建師范大學, 福建 福州 350007
        王敏:醫學光電科學與技術教育部重點實驗室, 福建省光子技術重點實驗室, 福建師范大學, 福建 福州 350007
        陳建新:醫學光電科學與技術教育部重點實驗室, 福建省光子技術重點實驗室, 福建師范大學, 福建 福州 350007

        聯系人作者:王敏(mwang@fjnu.edu.cn)

        備注:福建省自然科學基金、中央引導地方科技發展專項、國家教育部創新團隊發展計劃項目、福建省科技廳光電傳感應用工程技術研究中心開放課題;

        【1】Ayres C E, Jha B S, Meredith H et al. Measuring fiber alignment in electrospun scaffolds: a user''s guide to the 2D fast Fourier transform approach. Journal of Biomaterials Science, Polymer Edition. 19(5), 603-621(2008).

        【2】Sander E A and Barocas V H. Comparison of 2D fiber network orientation measurement methods. Journal of Biomedical Materials Research Part A. 88A(2), 322-331(2009).

        【3】Fei L, Cui Y, Wan D Y et al. Design and fabrication of bionic broadband antireflective microstructure on zinc selenide. Acta Optica Sinica. 38(1), (2018).
        費亮, 崔云, 萬冬云 等. 硒化鋅襯底表面仿生寬帶增透微結構的設計及制作. 光學學報. 38(1), (2018).

        【4】Bayan C, Levitt J M, Miller E et al. Fully automated, quantitative, noninvasive assessment of collagen fiber content and organization in thick collagen gels. Journal of Applied Physics. 105(10), (2009).

        【5】Zhou Y J and Zheng Y P. Estimation of muscle fiber orientation in ultrasound images using revoting Hough transform (RVHT). Ultrasound in Medicine & Biology. 34(9), 1474-1481(2008).

        【6】Josso B, Burton D R and Lalor M J. Texture orientation and anisotropy calculation by Fourier transform and principal component analysis. Mechanical Systems and Signal Processing. 19(5), 1152-1161(2005).

        【7】Feng X G and Milanfar P. Multiscale principal components analysis for image local orientation estimation. [C]∥Conference Record of the Thirty-Sixth Asilomar Conference on Signals, Systems and Computers 2002, November 3-6, 2002, Pacific Grove, CA, USA. New York: IEEE. 478-482(2002).

        【8】Cheng L Y, Mi G Y, Li S et al. Quality diagnosis of joints in laser brazing based on principal component analysis-support vector machine model. Chinese Journal of Lasers. 44(3), (2017).
        程力勇, 米高陽, 黎碩 等. 基于主成分分析-支持向量機模型的激光釬焊接頭質量診斷. 中國激光. 44(3), (2017).

        【9】Pena A M, Fabre A, Débarre D et al. Three-dimensional investigation and scoring of extracellular matrix remodeling during lung fibrosis using multiphoton microscopy. Microscopy Research and Technique. 70(2), 162-170(2007).

        【10】Sun T L, Liu Y, Sung M C et al. Ex vivo imaging and quantification of liver fibrosis using second-harmonic generation microscopy. Journal of Biomedical Optics. 15(3), (2010).

        【11】Morishige N, Yamada N, Teranishi S et al. Detection of subepithelial fibrosis associated with corneal stromal edema by second harmonic generation imaging microscopy. Investigative Opthalmology & Visual Science. 50(7), 3145-3150(2009).

        【12】Jia X J, Liao W Z, Sun Y X et al. Two-stage calibration method based on ray beeline tracking in structured light field. Journal of Optoelectronics·Laser. 29(3), 276-286(2018).
        賈小軍, 廖偉志, 孫亞新 等. 結構光場光束直線跟蹤的兩步標定方法. 光電子·激光. 29(3), 276-286(2018).

        【13】Rodriguez A, Ehlenberger D B, Hof P R et al. Three-dimensional neuron tracing by voxel scooping. Journal of Neuroscience Methods. 184(1), 169-175(2009).

        【14】Wu J, Rajwa B, Filmer D L et al. Analysis of orientations of collagen fibers by novel fiber-tracking software. Microscopy and Microanalysis. 9(6), 574-580(2003).

        【15】Park H J, Kubicki M, Westin C F et al. Method for combining information from white matter fiber tracking and gray matter parcellation. American Journal of Neuroradiology. 25(8), 1318-1324(2004).

        【16】Friman O, Farneb?ck G and Westin C F. A Bayesian approach for stochastic white matter tractography. IEEE Transactions on Medical Imaging. 25(8), 965-978(2006).

        【17】Sandau K and Ohser J. The chord length transform and the segmentation of crossing fibres. Journal of Microscopy. 226(1), 43-53(2007).

        【18】Robb K, Wirjadi O and Schladitz K. Fiber orientation estimation from 3D image data: practical algorithms, visualization, and interpretation. [C]∥7th International Conference on Hybrid Intelligent Systems (HIS 2007), September 17-19, 2007, Kaiserlautern, Germany. New York: IEEE. 320-325(2007).

        【19】Zhu J, Tang H Q and Li X L. Focusing properties of partially coherent Gaussian beam with cosine-Lorentz correlated structural function. Acta Optica Sinica. 37(11), (2017).
        朱潔, 唐慧琴, 李曉利. 具有余弦-洛倫茲關聯結構函數部分相干高斯光束的聚焦性質. 光學學報. 37(11), (2017).

        【20】Altendorf H, Decencière E, Jeulin D et al. Imaging and 3D morphological analysis of collagen fibrils. Journal of Microscopy. 247(2), 161-175(2012).

        【21】Quinn K P and Georgakoudi I. Rapid quantification of pixel-wise fiber orientation data in micrographs. Journal of Biomedical Optics. 18(4), (2013).

        【22】Liu Z Y, Quinn K P, Speroni L et al. Rapid three-dimensional quantification of voxel-wise collagen fiber orientation. Biomedical Optics Express. 6(7), 2294-2310(2015).

        【23】Lau T Y, Ambekar R and Toussaint K C. Quantification of collagen fiber organization using three-dimensional Fourier transform-second-harmonic generation imaging. Optics Express. 20(19), 21821-21832(2012).

        【24】Paulose T, Montévil M, Speroni L et al. SAMA: a method for 3D morphological analysis. PLoS ONE. 11(4), (2016).

        【25】Liu Z Y, Pouli D, Sood D et al. Automated quantification of three-dimensional organization of fiber-like structures in biological tissues. Biomaterials. 116, 34-47(2017).

        【26】Li Z F, Qiu S P, Wu S L et al. Quantification of collagen fiber orientation based on center line of second harmonic generation image for naturally aging skins. Optoelectronics Letters. 14(4), 306-310(2018).

        【27】Haralick R M. A facet model for image data: regions, edges, and texture. ∥Simon J C, Haralick R M. Digital image processing. Dordrecht: Springer. 77, 337-356(1981).

        引用該論文

        Guannan Chen, Qun Zhou, Chao Wei, Min Wang, Jianxin Chen. Three-Dimensional Fiber Orientation Detection Based on facet Model[J]. Laser & Optoelectronics Progress, 2019, 56(14): 141004

        陳冠楠, 周群, 韋超, 王敏, 陳建新. 基于facet模型的三維纖維方向檢測方法研究[J]. 激光與光電子學進展, 2019, 56(14): 141004

        您的瀏覽器不支持PDF插件,請使用最新的(Chrome/Fire Fox等)瀏覽器.或者您還可以點擊此處下載該論文PDF

        色女孩