1. <var id="66166"><rt id="66166"></rt></var>
        <var id="66166"><rt id="66166"><big id="66166"></big></rt></var>
        首頁 > 論文 > 最新論文

        摘要

        將疊層掃描成像技術(ePIE)用于成像透鏡透射波前的高精度測量。將透鏡的透射光束照射至一個固定于二維掃描臺的衍射物上,并在其后的探測器上形成衍射光斑,掃描臺橫向掃描并記錄衍射物在每個位置所形成的衍射光斑,采用ePIE精確重建衍射物體的光場復振幅,并據此反演出透鏡后表面的透射光波前;移去透鏡后重復上述步驟,可以重建入射到透鏡上的光束波前;將透射波前減去入射波前即可得到透鏡的透射波前。該方法具有準

        PDF全文 中國激光 | 2019,46(08):0804001
        分享:

        摘要

        By using a specialty optical fiber, a series of powerful microparticle manipulation tools, including optical tweezers, a micro-optical hand, and an optical gun, are developed and demonstrated. In this paper, a review of our research activities on the optical manipulation of microparticles is presented. In particular, we will describe a kind of specialty optical fiber designed a

        分享:

        摘要

        A new structure of short-cavity random fiber laser (RFL) with narrow linewidth lasing is proposed. A π-phase-shifted fiber Bragg grating (FBG) loop mirror was used in the RFL for spectral filtering and to suppress multi-mode oscillation du

        分享:

        摘要

        Yb3+/Er3+ co-doped Na5Lu9F32 single crystals used as a spectral up-converter to improve the power conversion efficiency of perovskite solar cells are prepared via an improved Bridgman approach. Green and red up-conversion (UC) emissions under the excitation of near-infrared (NIR) bands of 900–1000 nm and 1400–1600 nm can

        分享:

        摘要

        A novel see-through virtual retina display (VRD) system is proposed in this Letter. An optical fiber projector is used as the thin-light-beam source, which is modified from a laser scan projector by separating the laser sources and the scan mechanical structure. A synthetic aperture method is proposed for simple, low-cost fabrication of a volume holographic lens with large nume

        分享:

        摘要

        A scanning three-dimensional coherent laser radar (ladar) based on the frequency modulated continuous wave (FMCW) is proposed and demonstrated, which can obtain many three-dimensional high-quality images. The system utilizes an electro-optic modulator and an optical filter to output a linear FMCW with a bandwidth of 2 GHz. The flexible and variable rotating double prism is used

        分享:

        摘要

        We demonstrate the full vectorial feature of second-harmonic generation (SHG), i.e., from infrared full Poincaré beams to visible full Poincaré beams, based on two cascading type I phase-matching beta barium borate crystals of orthogonal optical axes. We visualize the structured features of the vectorial SHG wave by using Stokes polarimetry and show the interesting doubling eff

        分享:

        摘要

        A three-wavelength coherent-modulation-imaging (CMI) technique is proposed to simultaneously measure the fundamental, second and third harmonics of a laser driver in one snapshot. Laser beams at three wavelengths (1053 nm, 526.5 nm and 351 nm) were simultaneously incident on a random phase plate to generate hybrid diffraction patterns, and a modified CMI algorithm was adopted t

        分享:

        摘要

        Although the streaked optical pyrometer (SOP) system has been widely adopted in shock temperature measurements, its reliability has always been of concern. Here, two calibrated Planckian radiators with different color temperatures were used to calibrate and verify the SOP system by comparing the two calibration standards using both multi-channel and single-channel methods. A hi

        分享:

        摘要

        The nanorod structure is an alternative scheme to develop high-efficiency deep ultraviolet light-emitting diodes (DUV LEDs). In this paper, we first report the electrically injected 274-nm AlGaN nanorod array DUV LEDs fabricated by the nanosphere lithography and dry-etching technique. Nanorod DUV LED devices with good electrical properties are successfully realized. Compared to

        分享:
        首頁上一頁12345678910下一頁尾頁
        色女孩